Tuesday, June 23, 2015

Doepfer A-180-3 Dual Buffered Multiple Announced

A-180-3 Dual
Buffered
Multiple
Following the many requests in the Doepfer Yahoo-group, Doepfer announced today that an A-180-3 Dual Buffered Multiple will soon be released.

Module A-180-3 is a dual buffered 1-in-3 multiple.
The signal applied to the input socker appears as a buffered signal at the three output sockets. 
Each output has it's own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled to the input of the lower unit. 
That way the module works as a single 1-in-6 buffered multiple provided that no signal is applied to the input of the lower unit.

Application: copying/buffering of control and audio signals.

Update by Dieter: "the prototype pcb of the dual buffered multiple (A-180-3) arrived and has been tested. As expected no problems occured. The
module will be released about September 2015. The price will be the same as the A-138u because it very similar (i.e. Euro 50)"

ps Doepfer is closed from June 20 until July 05, 2015. No shipping, no helpdesk, no repairs during this time.

No comments:

Post a Comment