Wednesday, December 12, 2012

A-171-2 Voltage Controlled Slew Limiter II Announced

Great news again this morning from the Doepfer Yahoo Usergroup.

The A-171-2 Voltage Controlled Slew Limiter II will be Doepfer's next new module with a lot of additional features beyond a simple slew limiter.
A-171-2 Prototype
It's mostly a licensed copy of Ken Stones VCS which is in turn based on the Serge VCS. (from the POLL earlier, remember?)
Dieter announced that negotiations with Serge and Ken Stone are nearly finished, and that they decided to publish the preliminary info page about the planned module on their website: www.doepfer.de/a1712.htm

The main features:
- Manual control of the Slew-Up time
- CV control of the Slew-Up time with polarizer
- Switch for linear/exponential shape of the rising section of the response curve
- Manual control of the Slew-Down time
- CV control of the Slew-Down time with polarizer
- Switch for linear/exponential shape of the falling section of the response curve
- CV Up and CV Down sockets are normalled
- Signal input (the "to-be-slewed" signal)
- Trigger input
- V/Oct input
- End output
- Cyle on/off (when "on" the End output is internally connected to the Trigger Input)
- Output
- LED display

Doepfer also mentioned that they will add some features so that 3-position switches can be used (e.g. log/lin/exp instead of log/lin only and two different cycle modes), but these decisions depend upon the results with the first prototype which he expects in January 2013.

No comments:

Post a Comment